Basic Introduction
Specifications |
Type 900 |
Disk outer diameter | 916 mm |
Maximum admitted diameter of work piece |
342 mm (368 mm) |
Minimum work |
0.3 mm |
Number of working axes |
4 axes |
Maximum allowable working pressure |
80kg/each axes |
Surface precision |
0.2-0.5 u |
Rotating Speed |
10-60 R.P.M. |
Main shaft horsepower(HP) |
7.5 HP variable speed |
Automatic |
1/2HP(agitator included) |
Automatic controller | can be controlled either by loop or by hour control |
Voltage | three-phase 20V |
Mechanical weight | approximate 1600 Kg |
Mechanical Dimensions | L1500*W1500*H1900 mm |
Standard accessories |
according to the actual equipment |
*Specification, size, and equipment will be subjected to change without prior notice. |
1. The machine is suitable for mass production and high precision operation.
2. Flatness precision for work piece can reach 0.2μ -0.5μ.
3. The machine is applicable to work on things with different shapes and different at the same time.
4. There is no influence on temperature and distortion, even if the work piece is as thin as 0.20m/m.
5. Maintenance of the grinding disk is available during manufacturing process, which there is no need to stop.
1. Disk cooling water circulatory system
2. Self-timer fixed amount spraying device
3. Stainless steel conditioning wheel
4. Diamond disk repairer
5. Precision ruler
6. Granite examination platform
7. Electrical control system (with program control and a 5.7 " color touch screen)